FVT/FVR-2100-A-D-USB-DVI Single Link, Dual Link or RGB-HV, & 2-CH Audio, Data and USB over 1 Fiber

Uncompressed Video Over Fiber Optic USB and Serial Data Transport

Features:

• Fully uncompressed up to 2560 x 1600
• Supports DVI-I – DVI-DL, RGB-HV, DVI-D
• Also supports SMPTE 292M 1.5G HD and SMPTE 424M 3G HD
• Eq’s and re-clocks
• Loop-thru DVI input
• Dual DVI output
• 3-Port USB 2.0 hub
• 2 analog audio
• 1 Data (RS232/422/485)
• Non-reduced blanking for CRT & LCD support
• EDID support
• 1,2 or 3 fiber
• ST or LC – Multimode or Singlemode
• Throw-down or rack

Complete Video Transport Solution for Remote Access of Computer

Applications:

• Commodity and stock exchanges
• Medical and MRI displays
• Advertising and signs
• Sporting and concert video displays
• Digital cinema
• Radar displays
• Air traffic Control
• Military info displays

Overview:

VidOptic’s FVT/FVR-2100-A-D-USB-DVI is designed to transport computer graphics while extending computer control via USB and serial data transport. With the addition of audio transport, the FVT/FVR-2100-A-D-USB-DVI becomes a complete solution for remote access to all the functionality of a computer desktop. With USB 2.0 transport included, the FVT/FVR-2100-A-D-USB-DVI goes far beyond a standard remote desktop allowing other peripherals such as printers, scanners or even web cams. This all over just ONE FIBER*.

The video transport section supports high–quality RGB–HV, DVI–D and DVI-DL through a DVI–I interface and is designed to increase the transmission distance limitations of high resolution RGB and DVI video and computer graphics.

The KVM-6000 Single Link system will trans- port virtually any VESA-compliant DVI or RGB signal from 640×480 VGA up to and including 1920×1200 @ 60 Hz Reduced Blanking WUXGA.  The dual link version will suport WQXGA (2560 × 1600) @ 60 Hz.

It will also transport HDTV formats from 480P up to and including 1080P with full clarity over one fiber and one wavelength (1310nm). Not to mention the transport of non-RGB video formats such as YUV, YCrCb or YPrPb.

The FVT/FVR-2100-A-D-USB-DVI provides a GUI interface that extends control and set up features through a host PC using the USB port located on the front panel.

VidOptic’s FVT/FVR-2100-A-D-USB-DVI supports USB 2.0 as well as the transport of two audio channels and uni- directional (with the option of bidirectional) RS232, RS422 or RS485 type data. No additional fibers are required for the audio or data options, although two fibers are required for bi-directional data and remote EDID options. It also carries a SMPTE 348 option, whereby the data stream between the transmitter and receiver is a 2.97GBPS SMTE 348M SDTI- compliant stream.

One of the most powerful features of the FVT/FVR-2100-A-D-USB-DVI is it’s ability to be easily routed via our EOS-4000 Series of optical patch bays. Whether single or dual-fiber versions, the EOS-4000 enables convenient patching of ALL of the supported signals. And since each signal is repeated by the EOS-4000, you get a fresh optical budget and increased operating distance at the patch.