The VidOwave 60G is remarkable for point to point wireless Ethernet communications. Operating on the V-Band the VidOwave 60G enables throughput at 1.25 Gbps to 1 KM. Single or Multi Mode Fiber Optic Interfaces are available.
The VidOwave 60G was designed for the 60 GHz spectrum for multiple reasons. This spectrum is unlicensed which allows for a lower or non-existent recurring cost. Also, due
to the atmospheric characteristics of 60 GHz, the VidOwave 60G is innately resistant to interference.
The VidOwave family of wireless Ethernet links has a proven record of performance on mission-critical events in Iraq and Afghanistan. The Latency of the VidOwave is next to zero at 2 nS. The VidOwave is been 100% bench/range tested for dynamic range and bit errors. The VidOwave is on it’s 3rd Generation, meets all industry standard features, and has improved antenna mount/pointing hardware.
• High Performance 1.25Gbps V-Band
• Allows for Unlicensed Deployment
• Low interference due to spectrum nature
• Extremely Low Latency of approx 2 nS
• Proven mission-critical performance
• 100% bench/range tested
• Improved antenna hardware
• Industry standard features included
• On 3rd generation, thousands deployed
Operating Range | |
Minimum to Maximum Distance | 300 m to 1,142 m |
Millimeter Wave Performance | |
Frequency | 57.0 to 64.0 GHz |
RF Injection Power into Antenna | 10mW (+10dBm) |
Antenna Type | Integral 13-in. parabolic |
Antenna Gain | 41dBi Minimum |
3-dB Beam Width | 0.9 degree |
Interfaces | |
Payload Interface | Gigabit Ethernet, 1000Base-SX, 850 nm, FC connector |
Management | 100Base-FX, MMF, 1310 nm, FC connector |
Installation | 10Base-T, RJ-45 Modular (with adapter cable) |
DC Power | MIL-C-5015-type connector for 14- to 18-AWG three-conductor power cable |
Management | |
Installation Tools | Laptop-based GUI software provided |
Remote Monitoring | via SNMP V1 or PC Based GUI |
Regulatory Compliance | |
Spectrum Rules | REC (09)01)) |
Electrical | UL – UL60950, EN-60950-1, IEC 609050-1 |
EMC | EN 55022, Emissions Class A, EN 301 489 Immunity |
Laser Safety | CDRH – Class 1 (21 CFR 1040 per Laser Notice No. 50) |
Power | |
Input Voltage | -48 VDC nominal (-40 to -57 VDC) |
Power Consumption | 70W Max. |
Maximum Input Current | 1.5 Amps |
Environmental & Mechanical | |
Operating Temperature | -30°C to 60°C (-22°F to 140°F) |
Storage Temperature | -30°C to 85°C (-22°F to 185°F) |
Relative Humidity | Up to 95%, non-condensing |
Transceiver H x W x D | 13.6 x 13.7 x 7.7 in. (34.5 x 34.8 x 19.6 cm) |
Mount Lever Arm*** | 11 in. (28 cm) |
Transceiver Weight | 12 lbs (5.5 kg) |