VRD-5100 ASI input HD-SDI output Receiver Decoder openGear Card
Receiver Decoder Cards for Video Encoding, Monitoring and Signal Distribution
OVERVIEW:
The VRD-5100 is a receiver decoder card with multiple channel, high-density, multi-format decoding capabilities. The ASI to ASI/SDI Receiver/Decoder card enables providers to receive an ASI signal and output that signal via ASI and SD/HD-SDI.
This series of receiver decoder cards are used within the openGear chassis. With the open architecture of the openGear system, the multi-format decoding functionality of the Modular Receiver Decoder (MRD) can be easily integrated with a wide range of solutions available from multiple companies each specializing in their own technologies.
KEY FEATURES:
- Multi-Format SD/HD MPEG2 & H.264 Decoder
Future proof off-air turn around applications with multi-format support on one card - Switchable SD/HD-SDI Outputs
Transition from SD to HD sources without changing hardware - Manual or AFD Triggered Down-conversion
Fix the output format to the preferred center-cut, letterbox, or anamorphic modes. Or, switch formats on the fly with support for the Active Format Descriptor (AFD) - Extensive Ancillary Data Support
Supports pass through for extensive ancillary data including: 608/708 closed caption, XDS/V-CHIP, AMOL, and Gemstar - ASI Output
Simultaneous ASI output to facilitate transport stream analysis or as an input directly to a stat-mux - Remote Access
View multiple chassis and multiple cards simultaneously with the DashBoard application. Integrate monitoring and control into any network management system with the available SNMP MIB
APPLICATIONS:
- Decode in the clear content for turn around encoding and distribution.
- Decode in the clear content for confidence monitoring
SPECIFICATIONS:
INPUT SPECIFICATIONS
Connector: (1) Female BNC
Impedance: 75Ω
ASI INPUT
Number of ASI Inputs: 1
Standard: EN50083-9 (V2:3/98) DVB-ASI
Data Bit Rate: 270 Mbps
Max TS Rate Supported: 160 Mbps
Mode: byte & burst
Packet Size: 188 byte & 204 byte
DECODER SPECIFICATIONS
Max TS Rate Supported: 160 Mbps
VIDEO PROCESSING
Number of supported services: 1
Supported Codecs:
MPEG2 ISO/IEC 13818-2
MPEG4 ISO/IEC 14496-10
Chroma/Profile/Level:
MPEG2 4:2:0, MP@HL / MP@ML
MPEG4 4:2:0, MP@4.1 & HP @4.0
Video Bit Rate: MPEG2 1-81 Mbps
Supported Video Formats:
1080i@ 25Hz, 29.97Hz, 30Hz
720p@ 50Hz, 59.94Hz, 60Hz
576i@ 25Hz
480i@ 29.97Hz
Display Modes:
Letterbox, Center-cut, and Anamorphic, or Active Format Descriptor (AFD)
Output Aspect Ratio: 4×3
AUDIO PROCESSING
Number of simultaneous services: 3
Supported Codec:
AC-3 (decode and downmix)
MPEG1 Layers I and II
MPEG2 Layer II
MPEG2 AAC-LC ADTS
MPEG4 AAC-LC ADTS & LOAS
AC-3 Operational Mode: Line Mode, RF Mode, Custom 0, Custom 1
Dynamic Range Control: Enable / Disable
Downmix (selectable): Lo/Ro (Stereo), Lt/Rt (Surround), Dual Mono, Dual Left, Dual Right
OUTPUT SPECIFICATIONS:
ASI OUTPUT
Number of ASI Outputs: 1
Standard: EN50083-9 (V2:3/98) DVB-ASI
Data Bit Rate: 270 Mbps
Max TS Rate Supported: 160 Mbps
SD/HD SDI OUTPUT
Connector: (4) Female BNC
Impedance: 75 ohms
Genlock –
Connectors: (1) Female BNC (Frame Mounted)
References: (2) User selectable frame references
SDI: Line and Pixel Adjustment
SD-SDI SPECIFICATIONS
Standard: ITU-BT.601/SMPTE 259M
Data Bit Rate: 270 Mbps
Number of Serial
Video Outputs: 4 (2 Pair)
Display Modes: Letterbox, Center-cut, and Anamorphic, or Active Format Descriptor (AFD)
Embedded Audio Format: SMPTE272M
Sample Rates Supported: 32 – 48KHz
Sample Rate Out: 48KHz
Failure Response: Squelch SDI or Raster (Selectable)
Embedded Audio Channel Pairs: 4 (2 complete audio groups)
Embedded Audio Control: Selectable – “type”/disable (Independently controlled pairs)
Audio Type Standard:
Compressed (IEC 60958)
Uncompressed (IEC 61937)
Closed Captions:
Embedded – EIA-708B or EIA-608B
Line21 – Enable/Disable (selectable)
HD-SDI SPECIFICATIONS
Standard: SMPTE 292M
Data Bit Rate: 1.485Gbps
Return loss: >=15dB,
Video Format Standards:
SMPTE 274M (1080I, 29.97Hz)
SMPTE 296M (720P, 59.94Hz)
Embedded Audio Format: SMPTE 299M
Sample Rates Supported: 32, 44.1, 48KHz
Sample Rate Output: 48KHz
Number of Embedded Audio Channel Pairs: 4 (2 complete audio groups)
Embedded Audio Control: Selectable – “type” and disable (Independently controlled pairs)
Audio Type Standard:
Compressed (IEC 60958)
Uncompressed (IEC 61937)
Closed Captions:
Embedded – EIA-708B or EIA-608B
Enable/Disable – selectable
DIGITAL AUDIO OUT SPECIFICATIONS
General
Connector: (2) BNC, female (User Selectable)
Impedance: 75Ω
Audio
Digital Output format: S/PDIF/AES3id (Unbalanced)
Type (selectable):
Pass-through (native – AC3, MPEG, etc.),
PCM (uncompressed Ch1 and 2)
Standard
IEC 60958-3 AC-3 (consumer), MPEG-1/2, Layers I and II
AES3id (IEC 60958-4/61937), Ch1/2 (professional)
Ordering Information:
Product: VRD-5100
Description: ASI input HD-SDI output Receiver Decoder openGear Card